Dyson has announced its newest floor cleaner, the WashG1. As the name suggests, it’s a wet floor cleaner. It’s the first dedicated cleaner of its type that Dyson has produced–although there is a wet cleaning head on the V15s Submarine (read our review to find out more).
For the first time in its floor care range, Dyson has moved away from cyclone technology. Or, as the Dyson press office would have it (cruelly pre-empting similar puns from journalists), the WashG1 is “a wet floor cleaner that doesn’t suck”.
The 10-pound WashG1 has a simple, minimalist design. Its color scheme is a little more muted than other Dyson cleaners, with a black floor head, handle and accessories, and a simple, angled, metallic blue wand. Mounted on the front are 1-liter clean and dirty water tanks.
![Dyson WashG1 side view](jpg/washg1_side_view981d.jpg)
Emma Rowley / Foundry
The controls and display are equally pared back, with an LCD screen that shows water level and remaining time, and just three buttons. One is for power, one cycles between low, medium, and high water usage, plus there’s a boost button if you really need to give the floor a good soaking.
This story is part of TechHive’s in-depth coverage of the best robot vacuums.
I was one of the lucky few allowed to try it out at Dyson’s Malmesbury, U.K. campus before it was officially announced. We’ll give it a full review as soon as we’re able to test it properly–but from a short trial, I can say that there’s a lot to like about it.
It feels light and maneuverable, its display is clear, and it’s intuitive and easy to use. When it comes to emptying and refilling, the clean and dirty water tanks pop off together, which makes it much less of a hassle to do.
But there’s one design element that I do not like one bit.
Dyson is very keen to display the effectiveness of its cleaners. All of its vacuums have clear dustbins, and its most recent models (including the V15 Detect and the Gen5 Detect) feature a piezo sensor and LCD screen that work together to show you the volume and type of dust and dirt particles you’ve vacuumed up. The message is as clear as the bins: these vacuums may be pricey but they’re effective.
The WashG1 is no different. Unlike many other wet floor cleaners, which have smoked, frosted or colored dirty water tanks to obscure the unpleasantness within, the WashG1 has a perfectly transparent, highly visible tank–because Dyson wants you to see all the muck you’re removed from your hard floors.
And view it you will, because thanks to the sparse, elegant design of the WashG1, it’s right in front and impossible to ignore. Personally, I found it a little bit gut-churning as it fills up.
![The dirty water tank on the WashG1](jpg/washg1_dirty_tank981d.jpg)
Emma Rowley / Foundry
It’s understandable that Dyson wants you to see how much better the WashG1 is than your regular ol’ mop. But if you’ve spilled half a can of soup on the floor, it’ll be fairly obvious when it’s gone, so do you really need to look at a tank full of watery orange mess?
It doesn’t use suction in the traditional sense, in that it doesn’t suck water up from the floor, like most rival wet floor cleaners
How the WashG1 works
Charlie Park, VP of Dyson Home Engineering says: “Dyson engineers solve the problems others ignore and we thrive on the challenge of creating better technology. The Dyson WashG1 is the result of this; our first dedicated wet machine to wash hard floors, properly and hygienically.”
Dyson’s approach was characteristic. The floor care industry has three standardized tests for wet floor cleaners: dried-on blobs of tartar sauce, mustard, and coffee. Dyson felt this wasn’t sufficient for the breadth of problems a cleaner would need to tackle, so it developed its own tests for more types of likely spills. These included wet spills, makeup, hand sanitizer, and more, with the idea that it’s not just what’s in the pantry but what’s in the bathroom that’ll need to be cleaned up.
What it came up with is a complete wet floor cleaning system for all hard flooring types that can deal with both wet and dry debris. What’s more, it separates wet from dry, so you won’t have to deal with the unpleasantness of pulling a handful of hair from the dirty water tank before emptying. (I’ve been there.)
It doesn’t use suction in the traditional sense, in that it doesn’t suck water up from the floor, like most rival wet floor cleaners. Instead, it disperses water via 26 points along the cleaning head and employs two counter-rotating microfiber-coated rollers to pick up dirty water and debris. An advantage of the twin rollers is that the WashG1 cleans as it moves forward and back, unlike single-roller rivals.
However, it does use suction in the form of a small pump that sucks air out of the water tank. As the pump never comes into contact with water, thanks to a spigot which closes the air valve, there’s no need for a filter to protect the motor from liquid. This allowed Dyson to banish the replaceable filter you’ll find in most rival wet vacuums, which picks up odor and bacteria.
![Screen and buttons on the WashG1](jpg/washg1_controls981d.jpg)
Emma Rowley / Foundry
The clean water tank and battery life will give you up to 290m2 of cleaning, or about 45 minutes of cleaning time. The limiting factor in the WashG1 isn’t battery life–it’s water use. So, if you use the highest water level, you’ll only get 7-8 minutes of cleaning time before the water depletes and the dirty tank is close to filling up.
Like any wet floor cleaner, you’ll get the best results by running an ordinary vacuum around first as there’s less chance of clogging up the system. However, Dyson reassured me that shorter hair, such as pet hair, won’t be a problem thanks to the secondary brush bar. Microfiber on the cleaning rollers will grip pet hair until it comes into contact with the bristle bar, which is designed to flick hair and debris into the debris tray, which can be emptied separately.
The WashG1 stands in a charging dock and, after use, you can start the self-cleaning mode, which is another thing you won’t have to worry about. There’s no hot air drying for the rollers, however, and long hair may have to be removed from the bristle bars by hand.
Dyson WashG1 price & availability
The WashG1 is priced at $699 in the US and £599 in the UK.
It’ll be available to buy later in this year but, as yet, a precise launch date hasn’t been confirmed. You can sign up at Dyson US or Dyson UK to find out about it and other upcoming launches.
This story was originally published on Tech Advisor, our sibling site.